Select Page

Specifications for Sewer and Manhole Bricks Based on ASTM C32

Specifications for Sewer and Manhole Bricks Based on ASTM C32


Manhole and sewer bricks manufactured from shale and clay should meet requirements of applicable codes such as ASTM C 32 in order to be able to serve its purpose properly. The purpose of sewer structure and related structures are transportation of sewage, industrial wastes, and storm water.

Manhole and sewer bricks can be manufactured from clay, shale, or similar naturally occurring materials and treated by proper firing or elevated temperature to create adequate bond between components, and hence achieve adequate strength and durability.

Types of Bricks

Sewer and manhole bricks are classified into several types based on their grades. The classes of manhole and sewer bricks are presented in table 1.

Table 1 Classes of Sewer and Manhole Bricks Made from Clay and Shale

Brick classes Applications
Classes of bricks for sewer structure  
Grade SS Use in structures that require low absorption and resistance to the action of sewage carrying large quantities of abrasive material at velocities greater than 2.4 m/s.
Grade SM Use in structures that need to withstand the action of sewage carrying abrasive materials at velocities less than 2.4 m/s.
Classes of bricks for manhole  
Grade MS Employ in manholes and catch basins that require low degrees of abrasive resistance, high and uniform degree of resistance to frost action and disintegration.
Grade MM Use in manholes require high degrees of abrasive resistance, moderate and nonuniform degree of resistance to frost action and disintegration.

Properties

  1. Bricks should have rectangular cross section and its edges and corners must be straight to a great extent.
  2. Maximum 5mm depression or kiln marks is permitted on the backside of sewer and manhole bricks.
  3. Surfaces and sides of sewer bricks must be smooth and plain
  4. Surface of manhole bricks should be plain and fairly textured.
  5. physical properties of bricks made from clay and shale are presented in Table 2.

Table 2 Physical Properties of Manhole and Sewer Bricks Made from Clay and Shale

Brick type Minimum Compressive Strength, Average Gross Area, (MPa) Minimum Compressive Strength, Average Gross Area, (MPa) Maximum Water Absorption by 5-h Boiling, % Maximum Water Absorption by 5-h Boiling, %
Average of 5 Brick Individual Average of 5 Brick Individual
Grade SS Sewer brick 55 41 6 9
Grade SM Sewer brick 34 26 12 15
Grade MS Manhole brick 21 17 17 20
Grade MM Manhole brick 17 15 22 25

Applications

  1. Drainage structures for the transport of sewage, industrial wastes, and storm water.
  2. Manholes
  3. Catch basins
Bricks Used to Construct Manhole
Fig. 1: Bricks Used to Construct Manhole



Source link

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *