Select Page

Design of High Strength Steel Reinforced Concrete Columns: A Eurocode 4 Approach

Design of High Strength Steel Reinforced Concrete Columns: A Eurocode 4 Approach

This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach.

Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials – columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mmand yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volume provides detailed worked examples on use of these high strength materials.

This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.

Table of contents :
Content: Cover

Half Title
Title Page
Copyright Page
List of symbols
1. Introduction
1.1 Steel-reinforced concrete columns
1.2 Application of high-strength materials
1.3 Limitation of current design codes
1.4 About this book
2. Materials
2.1 Concrete
2.2 Structural steel
2.3 Reinforcing steel
2.4 Shear connectors
2.5 Test database on steel-reinforced concrete columns
2.6 Strain compatibility
3. Concrete confinement model
3.1 General
3.2 Confinement model for partially confined concrete (reinforced concrete members)
3.2.1 Mander model 3.2.2 Legeron and Paultre model3.2.3 Eurocode2 model (European Committee for Concrete model code 90)
3.2.4 Fédération internationale du beton model code 2010
3.3 Confinement model for highly confined concrete
3.3.1 Lateral confining stress from steel section
3.4 Modified confinement model for steel-reinforced concrete columns
3.4.1 Effective lateral confining pressure on partially confined concrete
3.4.2 Effective lateral confining stress on highly confined concrete
4. Concrete creep and shrinkage model
4.1 General
4.2 Creep and shrinkage
4.2.1 fib Model Code 2010 Creep Shrinkage4.2.2 Eurocode 2 Creep Shrinkage
4.3 Load redistribution
4.4 Concrete creep and shrinkage model in steel-reinforced concrete columns
5. Design of steel-reinforced concrete columns
5.1 General
5.2 Local buckling
5.3 Axial compression
5.3.1 Resistance of cross-section
5.3.2 Resistance of members
5.4 Combined compression and bending
5.4.1 Resistance of cross-section
5.4.2 Second-order effects and member imperfections
5.4.3 Resistance of members in combined compression and uniaxial bending 5.4.4 Resistance of members in combined compression and biaxial bending5.5 Resistance to shear force
5.6 Introduction of load
5.7 Summary
6. Fire design
6.1 General
6.2 Temperature-time curves in fire
6.3 Performance of material at elevated temperature
6.3.1 Structural steel
6.3.2 Concrete
6.3.3 Reinforcing steel
6.4 Load level
6.5 Fire design resistance
6.5.1 Tabular data
6.5.2 Advanced calculation models


Title Design of High Strength Steel Reinforced Concrete Columns: A Eurocode 4 Approach
Author Sing-Ping Chiew (Author), Yan-Qing Cai (Author)
Language English
ISBN ISBN-13: 978-0815384601 ISBN-10: 0815384602
Size 2 MB
Download Method Direct Download  

Source link

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *